High Viscosity Chemical Electric Motor Barrel Pump Oil Pump Drum Barrel Pump

Product Description

Overview

 

 

Product Description

Electric barrel pumps, also known as barrel pumps, are mainly used to transport various acids, alkalis, solvents, additives, auxiliaries, oils and other liquid media in barrels or containers. They are powered by electric motors to quickly empty and refill barreled media.

 

Drum pump selection 1. Pump tube selection According to the properties of the medium being transported, the pump tube material can be selected from 304 stainless steel, PP (polypropylene), Teflon (Teflon) and other materials, which are used in different occasions. The selection principles are as follows: 1. Flammable and explosive solvent media must use 304 stainless steel pump tubes. It is strictly forbidden to use PP pump tubes, which are easy to produce static detonation media; 2. PP pump tubes can be used for medium acid and alkaline corrosive media. The outer tube material must be (PP + imported Hastelloy main shaft). If the main shaft is 304, 316 stainless steel, titanium alloy material, it will still corrode. 3. Strong acid and alkaline media must use Teflon (Teflon) material pump tubes. The outer tube must be (Teflon + imported Hastelloy main shaft). At present, only our company has this technology. Teflon is a top corrosion-resistant material and has been widely used in strong acid and alkali enterprises; Other pump tube parameters such as flow, head, viscosity, temperature, specific gravity, The length and diameter can be determined according to the specific production process to determine the pump type, such as the pump type of GISAN barrel pump: Features: no leakage, large flow, high head, various materials, wide range of applications Maximum head: 23m (electric), 11m (pneumatic) Maximum temperature: PP: 50ºC, PTFE: 160ºC, SS: 110ºC, AL: 110ºC Viscosity range: 0-2000cps (electric), 0-300cps (pneumatic) Maximum specific gravity: 1.8 Pump tube length: 700mm, 1000mm, 1200mm, 1500mm, non-standard customization Drive mode: electric motor or pneumatic motor Series features: light, low viscosity, solvent, strong acid and strong corrosion Series features: high viscosity, high head
II. Motor selection Selecting a motor requires caution, which directly affects the overall performance of the pump tube. It can be considered from the following aspects: safety, economy, and practicality. 1. Installation location: indoor outdoor heating no heating 2. Factory ambient temperature: 20°C in summer 0°C in winter 3. If the medium is of medium and low viscosity and is not flammable or explosive, a single-phase stepless speed regulation 220V motor can be selected. The selection of a speed regulation motor has the following benefits: (ordinary motors are unsafe to use) (1) Controllable speed and flow control: During the process of dispensing the medium, the flow can be easily controlled, and the range is 0-160 L/min (2) Stable performance, safe and worry-free: When users transport dangerous goods media, they can easily control the pressure in the pipe to reduce safety accidents (3) Wider application and greater viscosity: The transport viscosity range is wider, which can reach 0-1500cps (4) Low heat generation and longer life: Reduce noise and heat during motor operation and extend the service life of the motor 4. For low-viscosity and flammable and explosive media, you must choose an explosion-proof electric motor. If the factory has an air source, you can choose to use an air motor, which will be more economical. The air motor must be imported and have a certificate of origin. Domestic air motors are very unstable. 5. If the medium has high viscosity, a high-power three-phase asynchronous motor can be selected As a professional barrel pump manufacturer, PIONEER's products include multiple series and dozens of specifications, which can meet all barrel/container liquid transportation applications. Using PIONEER container emptying becomes fast, effective and safe. Filling or emptying the container will not overflow or splash, avoiding contact or exposure of the operator to harmful media. All PIONEER pumps are designed with the user in mind. The compact and impact-resistant motor housing is integrated, and the comfortable handle has a waterproof switch. The replaceable tubes and motors are easy to clean and maintain. All pump tubes have a simple structural design and only a few parts, which makes them very convenient to use and maintain. At the same time, the modular design ensures that the same motor can be used with different pump tubes, saving maintenance costs. PIONEER provides a wide range of accessories to choose from: hose connectors, hoses, barrel holders, filters, flow meters, filters, wall brackets, anti-static grounding wires, liquid filling guns, etc., which make the use of barrel pumps safer and more convenient.
Precautions for installation and use of barrel pump 1. Please always keep the motor in a vertical position. After use, it is strictly forbidden to invert the pump pipe and motor to prevent liquid from flowing back into the motor, corroding and damaging the motor 2. Please try not to run the pump dry. When the liquid in the barrel is pumped out, please stop the pump as soon as possible; 3. The connection between the motor and the pump pipe should be installed in place, otherwise it will cause damage to the coupling. Try to reduce repeated installation and disassembly to extend the service life of the coupling, coupling elastic block, pump head, and bearings 4. If the pump has no flow or unstable flow, stop the pump immediately and check whether the pump shaft can rotate flexibly. If the pump is stuck, continue to turn on the electric motor, it will cause damage to the electric motor due to overload 5. When using the speed regulating motors of the PT and TB series, the higher the viscosity of the medium, the lower the speed should be. For mediums with high viscosity, the motor speed is too fast, which is easy to cause heating and damage. Please refer to the viscosity range and read the operating manual that comes with it; when the motor stops halfway during operation and the switch fails, please don't worry, the motor is not damaged at this time, but because the motor temperature is too high due to long working hours, the protection switch in the motor cuts off the power supply. After stopping for 5-10 minutes to cool down, you can resume work. It is recommended to rest for 5 minutes every 20 minutes of work before working; 6. If there are often large particles or fiber impurities in the liquid, please install a filter at the inlet at the bottom of the pump; 7. Before transporting a variety of corrosive liquids, please ensure that the liquid will not corrode the pump pipe. It is strictly forbidden to use plastic pump pipes (PP and PTFE) and ordinary electric motors in explosion-proof occasions. 8. When using a barrel pump in an environment with explosion-proof requirements, be sure to use a stainless steel pump pipe and a pneumatic motor or an explosion-proof motor. It is best to ground the pump pipe to prevent static electricity and sparks.

 

As a well-known large-scale diversified enterprise integrating research, development, production, sales and service in China, PIONEER has always adhered to the purpose of "surviving by quality and developing by quality" to provide high-quality services to our customers! At the same time, we have always focused on improving our own strength and strictly controlling product quality. For this reason, we not only have the highest level of domestic pump performance testing center, a complete integrated service system, and experienced pump experts, but also after years of development, our products have obtained various professional certification certificates and customer recognition with superior performance, excellent quality and good service reputation. Through the unremitting efforts of the team, PIONEER has made great achievements in the domestic water pump industry. Such a leader in the water pump industry with integrity and responsibility has its own unique methods for various aspects such as water pump repair and maintenance. The company has established a complete set of strict quality assurance systems from design, development, production, manufacturing to service.

 

 

Specification

item	value
Warranty	1 year
Customized support	OEM, ODM, OBM
Brand Name	PIONEER
Place of Origin	China
Province	Shanghai
Application	Industrial Utilities, Pharmaceutical industry, Washing and Cleaning, wastewater treatment, Water Treatment Solutions
Horsepower	15hp
Power Source	Electric
Pressure	Low Pressure
Structure	Drum Pump
Outlet Size	25
Voltage	380v
Power	15kw
motor	YE3
Application	Wastewater Transport
Voltage	220V/380V/440V
Theory	Centrifugal
Material	Stainless Steel
Keywords	Liquid Transfer Pump
Certification	ISO9001
Standard or Nonstandard	Standanrd
Color	Customers Request
Flow rate	31 - 200 L/M
MOQ	1 Set

Packing & Delivery

 

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Company Profile

 

 

FAQ

1. who are we?
We are based in Henan, China, start from 2019,sell to Domestic Market(20.00%),Southeast Asia(20.00%),Eastern Asia(10.00%),Mid East(10.00%),South America(10.00%),Northern Europe(10.00%),Africa(5.00%),South Asia(5.00%),North America(5.00%),Central America(5.00%). There are total about 5-10 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
centrifugal pump,industrial valve,PTFE lined pipe,chemical pump,Plastic pipe

4. why should you buy from us not from other suppliers?
Luoyang Pioneer Anticorrosion is specialized in the manufacturing of international quality anti corrosion pumps,valves,pipes and fittings. The products are widely used for scrubbing, steel pickling, electroplating, paints, dye stuffs, chlor alkali,

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU,DAF;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian